@

Thursday, March 29, 2012

How to replace Coil Springs on Toyota Land Cruiser and Sequoia?

The procedure mentioned is similar for both Toyota Sequoia and Land Cruiser car models.


Coil Springs
REMOVAL & INSTALLATION Step by Step Instructions and diagrams are as follows :-----


  1. Remove the strut.
  2. Using a compressor, compress the coil spring.
    NOTE
    A compressor with a force of 2,860 lbs. (12,740 N) or more must be used. Make sure that the suspension support is free from the spring. Do not compress the spring more than necessary. Do not position the spring with the upper end towards you.
  3. Remove the center nut.
  4. Remove the retainers, bushing support and spring.
  5. Assembly is the reverse of disassembly. See the accompanying illustration for correct positioning of the suspension support and spring. Torque the nut to 18 ft. lbs. (25 Nm). 

    image
    Fig. Correct spring positioning-Sequoia


    image
    Fig. Correct suspension support positioning-Sequoia

These details will help.
Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html


2 comments:

  1. It’s a very nice posting. I really like your posting as it provide valuable tips and information. This article is unique, original and engaging. Thanks for sharing this posting…!
    Coil Springs

    ReplyDelete
  2. Great Blog!! That was amazing. Your thought processing is wonderful. The way you tell the thing is awesome. You are really a master.
    coil springs

    ReplyDelete