Computer will not recognize USB Printer ?

In most cases, the driver for a printer is supplied when you purchase it. It is the responsibility of the manufacturer to provide the driver along with the device to make sure the working.

However, most of the Operating Systems come with native driver support for many known printers. This is the fact we have to take care while purchasing a printer. Even though we misplaced the driver disc, if we purchase a good manufacturer printer, there is a chance to get the native support from Operating System itself.

There are some scenarios where printer may not be recognized by the Operating System due to some conflict with other devices.

Please follow the troubleshooting steps and check the operation:

• Ensure that the supplied USB cable is firmly connected to both the printer and computer side.

• Ensure that the USB driver for the printer has been properly installed. Please follow the steps to ensure that:

1. Turn ON the computer and then printer.
2. The Add New Hardware Wizard window will appear on the Computer screen.
3. Click the Next button
4. Insert the installation CD in to the CD/DVD drive on the Computer.
5. In the Add New Hardware Wizard window, click to select the CD-ROM drive.
6. Click the Next button.
7. In the Finish Setup dialog box, click the Finish button.

• If the USB driver for the Printer has already been installed, uninstall and then reinstall the driver.

Follow this procedure to reinstall the device driver using the Device Manager utility.

IMPORTANT: This procedure must be performed while logged in as Administrator or to an account with Administrator rights.

1. Click the Start button, and then click Control Panel.
2. In the Control Panel window, under Pick a category , double-click the Performance and Maintenance icon.
3. In the Performance and Maintenance window, under or pick a Control Panel icon, double-click the System icon.
4. In the System Properties window, click the Hardware tab.
5. On the Hardware tab, in the Device Manager box, click the Device Manager button.
6. In the Device Manager window, double-click the category icon of the device to be removed.
7. Under the Device Manager category, click to select the device to be removed.
8. On the menu bar, click Action.
9. On the Action menu, click Uninstall .
10. In the Confirm Device Removal window, click the OK button.
11. Restart the computer.

NOTE: For some devices the operating system will display a System Settings Change window. Click the Yes button to restart the computer. When the computer restarts, the operating system will find the device and install the driver. If the operating system is unable to automatically find the driver, have the installation wizard search the C:WINDOWSI386 folder.

• Remove and reconnect the printer.

How to transfer songs, videos and pictures?

It is so easy to transfer music files, videos and pictures to a Sony Walkman using Windows Explorer. Of-course, it is almost same for other manufacturer products as well. You can use theWindows Explorer to transfer files (music, images and videos) to a Walkman Player. Once you connect the Walkman Player to the Computer, it will display asan additional storage media under My Computer. Please follow the below steps toaccess the Walkman Player using Windows Explorer.

• Click Start and then click My Computer .
• In the My Computer window, under Other , double click the icon for your portable player.
• In the My Computer[Name of your portable player] window, double click Storage Media .

1. Now, drag and drop the music files or folders into the MUSIC folder.
2. Drag and drop video files or folders into the VIDEO folder.
3. Drag and drop picture/image files or folders into the PICTURE or DCIM folder.

Now, the only thing you want to make sure isthat you're transferring compatible files to the player to use in it.The video files should meet the following requirements.



MP3 is fine for audio and for images, jpeg wouldbe good.

Door locks or windows not working on car?

Alot of older cars and even some newwer cars and truck, you may find that door locks or windows work sometimes and not other times and they may not work at all. i've found that many of them are not working due to a broken wire or two in the wiring coming inside the door where the door hinges are located, in side the rubber boot, pull boot back from rear and front one at a time and take a good look at the wiring , make sure there are no broken wires, these wires sometimes break in half from the door opening and closing so many times, if you find a broken wire it can be repaired by adding a small peice and crimping them back together. this happens to alot of makes and models, like jeep, chrysler and gm.

------------

For more car problems troubleshooting.Click this link below:---

http://schematicsdiagram.blogspot.com/2011/06/car-troubleshooting-guide.html

WHERE IS THE CRANK SENSOR located on 1999 DOGDE RAM?

passanger side bell housing just above the exaust pipe.

-------------

For more car related problems, click this link below:--

http://schematicsdiagram.blogspot.com/2011/06/car-troubleshooting-guide.html

Air blows out defrost only?

A poorly fitting vacuum harness to the control head results in vacuum leaking and air blows out the defrost ducts by default by law.

You can replace the vacuum harness or use 2 10" tie straps that wrap around the back plate and go on either side of the black vacuum supply hose.
The vacuum harness is $22, but even if you replace it, you should use the tie straps. There is not enough of an interference fit bweteen the hoses and the tubes.

You also may have internal vacuum leaks on the control head back/bottom plate. It has 4 solenoids that direct vacuum to the correct vacuum motor on the plenum. Thy have been known to leak.

Gino on Ebay fixes them on an exchange basis for about $125.

-------------

for more car related problems, click the link below:---

http://schematicsdiagram.blogspot.com/2011/06/car-troubleshooting-guide.html

Where is fuel filter located on 2004 ford freestar

Inside the frame rail, about 3/4 of the way back, about the size of a coke can. May have a guard that hides it.
It is underneath the van on the driver's side near the rear edge of the driver's door. Follow the fuel line coming out of the gas tank to it.

-----------

for more car related help.click this link below:--

http://schematicsdiagram.blogspot.com/2011/06/car-troubleshooting-guide.html

Outlook 2007 will not upload large file attachments?

PROBLEM: User was unable to send large file attachments (Over 1.6 GB) using Outlook 2007. Webmail will allow the file to be attached.
RESOLUTION: The default timeout value in Outlook 2007 is 60 seconds, too short for most ISP connection speeds to send large files. Resolution is changing the default timeout to 300 seconds using these steps. In Outlook, Click Tools, Accounts, Change, Advanced, Server Timeout, there change the timeout to 300 seconds save and exit.