Fuel Pump REMOVAL and INSTALLATION on Honda odyssey?

Removal & Installation

2001-04 Models

1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
2. Relieve the fuel system pressure.
3. Remove or disconnect the following:
   
   
   Negative battery cable

   Rear seats and carpet

   Access panel

   Fuel pump module wiring connector

   Fuel supply and return lines

   Fuel pump locknut using wrench 07XAA-001010A as shown in the accompanying illustration.

   Fuel pump module
   
   

To install:

1. Install or connect the following:
   
   
   Fuel pump module. Use a new seal and align the matchmarks.

   Fuel pump locknut and tighten to 69 ft. lbs. (93 Nm) using wrench 07XAA-001010A

   Fuel supply and return lines

   Fuel pump module wiring connector

   Access panel

   Rear seats and carpet

   Negative battery cable
   
   
2. Start the engine and check for leaks.

To Order car parts online:--To get heavy discount on car parts .Click this link below:----

http://technoanswers.blogspot.com/2011/05/from-where-to-order-car-parts-online.html

For car error code diagnosis click the link below:---

http://www.automd.com/diagnose/?amdcid=apwldrbrd1

Car no start:--

http://technoanswers.blogspot.com/2011/05/car-will-turn-over-but-will-not-start.html