Relieving Fuel System Pressure on Honda odyssey?

2001-04 Models

1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
2. Disconnect the negative battery cable.
3. Remove the fuel filler cap.
4. Place a shop towel over the fuel pulsation damper.
5. Loosen the fuel pulsation damper 1 turn.
6. When service is completed, replace the sealing washer and tighten the pulsation damper to 16 ft. lbs. (22 Nm).
7. Replace the fuel filler cap.
8. Connect the negative battery cable.
9. Start the engine and check for leaks.
   
   
   

   

   Fig. Use a wrench on the fuel pulsation damper (A). Place a rag over the damper (B) when relieving residual fuel pressure-2001-04

   
   

   
   

   
   

   
   

   To Order car parts online:--To get heavy discount on car parts .Click this link below:----

   http://technoanswers.blogspot.com/2011/05/from-where-to-order-car-parts-online.html

   For car error code diagnosis click the link below:---

   http://www.automd.com/diagnose/?amdcid=apwldrbrd1

   Car no start:--

   http://technoanswers.blogspot.com/2011/05/car-will-turn-over-but-will-not-start.html