Basic Master cylinder removal process---
First you will have to Disconnect the clutch pedal arm from the pushrod clevis in the passenger compartment.See the diagram shown above.
After that Disconnect and cap the hydraulic line at the clutch master cylinder.
WARNING
Any brake fluid that is removed from the system should be discarded. Also, do not allow any brake fluid to come in contact with a painted surface; it will damage the paint. Place a rag under the cylinder to absorb any spilled fluid.
Remove the nuts attaching the master cylinder to the firewall.
Remove the master cylinder from the engine compartment.
This will help.
Thanks.
No comments:
Post a Comment