schematics and diagrams: Abs Brakes

Wednesday, June 6, 2012

The Brake warning light Came ON dash.Rear brake lights not turning off and Cruise control not operating.

But this Light got OFF after replacing the Brake light switch.

If the Brake warning light on the dash is now OFF after the replacement of the Brake Light Switch, then the switch was the problem that was setting the light. This switch is monitored by the brake system, and when faulty will set the light (and also keep the rear brake lights on, and make cruise control inoperative). As long as there are no current lights on the dash, the ABS system is fine. When there is an ABS problem, you will get an ABS wanring light along with the Brake warning light.

More than likely the switch was the culprit. Just to make sure, give the brake fluid level a quick check and make sure it's full. If the Brake light returns without an accompanying ABS Light, then the ABS system is not the fault, and other things should be inspected like the brake fluid level sensor and/or the emergency brake switch.

This details will help.
Thanks.

Users Who Viewed This Problem Also Viewed:

All types of brake problems and repairs

http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

Brake Pads Inspection on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-pads-inspection-on-acura-integra.html

Vibrations while braking On Chevrolet Van?

http://technoanswers.blogspot.in/2012/04/vibrations-while-braking-on-chevrolet.html

Dragging brakes?

http://howtobyme.blogspot.in/2012/03/dragging-brakes.html

Brake pedal stuck?

http://howtobyme.blogspot.in/2012/03/brake-pedal-stuck.html

After replacing brake rotors and pads, brake pedal remains on floor?

http://technoanswers.blogspot.in/2012/02/after-replacing-brake-rotors-and-pads.html

How to replace Brake Power Booster?

http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-brake-power-booster.html

1997 Chevy Tahoe Brake lights not working?

http://technoanswers.blogspot.in/2012/02/1997-chevy-tahoe-brake-lights-not.html

How to service Drum brakes?

http://repairhelpcenter.blogspot.in/2012/02/how-to-service-drum-brakes.html

What type of problems usually noticed on Drum brakes?

http://repairhelpcenter.blogspot.in/2012/02/what-type-of-problems-usually-noticed.html

How to test Drum Brakes?

http://repairhelpcenter.blogspot.in/2012/02/how-to-test-drum-brakes.html

Brake Bleeder Screw Function?

http://repairhelpcenter.blogspot.in/2012/02/brake-bleeder-screw-function.html

For All types of Car models and brands help
Go to Newly Launched

FREE Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html

&
Complete Car repair Help FREE?

http://repairhelpcenter.blogspot.in/2012/03/complete-car-repair-help.html

Friday, December 9, 2011

EBCM means Electronic Brake Control Module (EBCM).
Disassemble the EHCU assembly in order to disconnect the Electronic Brake Control Module (EBCM).
There is a Fuse,which you can remove to make EBCM inoperable but Unfortunately the same fuse also powers the compressor clutch. If you don't have A/C, pull that fuse. Otherwise, you may need to disconnect the module. The connector is on the side of the master cylinder--#3 in the picture below.

This basic details will help.Thanks.

------------------

If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.

For more Brake relates solutions,see the list below :----