schematics and diagrams: repair center for power door locks

Sunday, June 3, 2012

2002 Pontiac Grand AM: Power Door Lock Remote Will Not Get Programmed?

The power door lock remote got faulty.Due to this new remote was bought from dealer.But to make the new remote work,the remote has to be programmed.If the Remote is not getting programmed,then it will not get detected.In this case it can be faulty remote itself or its the Issue with BCM or Anti theft system.

first on the remote you bought, is it a genuine GM remote, or some aftermarket brand? I have seen several aftermarket ones on Ebay and such that dont work.
So Always by original factory remote from Dealer.

As per the power door lock diagram, bcm and antitheft diagrams. Because of how the circuits are run, even if one door lock actuator or switch was faulty, the other side would still work. The only common denominator between them not working and the remote not being able to be programmed is the BCM. Other then this nothing else will cause all the current issues.

Replacing the BCM will resolve this.

To replace the BCM its easy,the Procedure is as follows:-----

For this you will have to remove the right side trim panel underneath the right side of the dash and it is mounted on a bracket attached to the side to where the blower motor bolts to:

See the help diagram and instructions shown below:-----

Replacing BCM

Please Note:----

It has to be programmed with your current mileage and VIN code and used one will work as long as it is programmed first with your vehicle's information.

This details will help.

Thanks.

Users Who Viewed This Problem Also Viewed:

How to Replace Door Glass and Regulator?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-door-glass-and-regulator.html

How to remove Doors ?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-doors-on-acura-integra.html

1998 Toyota LandCruiser: Driver Door will not lock or unlock with Key or Remote?

http://whatisbyme.blogspot.in/2012/05/1998-toyota-landcruiser-driver-door.html

2004 Jeep Grand Cherokee: Driver door controls not working?

http://technoanswers.blogspot.in/2012/04/2004-jeep-grand-cherokee-driver-door.html

2009 Toyota Tundra: Driver side door will not lock or unlock with Remote?

http://technoanswers.blogspot.in/2012/04/2009-toyota-tundra-driver-side-door.html

For All types of Car models and brands help
Go to Newly Launched

FREE Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html

&
Complete Car repair Help FREE?

http://repairhelpcenter.blogspot.in/2012/03/complete-car-repair-help.html

Thursday, December 29, 2011

BMW 325 :

Many of out clients face this problem on their Cars.This problem is very common,not only on BMW car models ,but on many other car models which has automatic operating door.

In most cases the problem is as follows ...........
Button to lock the doors does not work. Customer can lock all doors from the out side with the key. But from the inside all has to be locked/unlocked manually.

Double check the fuses, but the door lock problem is almost certainly due to a failed general module. This is pretty common, this is the module that controls central locking. A dealer replacement runs about $700, but there are many repair centers who deals with door lock module repairing.I suggest you to locate,one repair center in your area.There are many online sites,which ask you to send your module,to their repair center.This is one site,mentioned below ..........

http://www.bmwgm5.com/

But this is not the only one,there are many other repair centers too.Getting help,from your local car garage or auto parts store will also help.They know, who is dealing with such modules in your area.

Hope this helps.

Thanks.

-----------

See below for more solved car problems :----