If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.
The details are as follows :----
Check the blend door cable for proper attachment to the control panel and to the blend door. Try opening the door manually to see the you can get hot air out. If not, the door may be broken inside the heater box. If yes, correct/adjust the cable attachment for proper operation.
REMOVAL & INSTALLATION
Install the cable ends marked with a white or blue band to the control head assembly. The cables must be attached to the control head before connection to the system air flaps.
REMOVAL & INSTALLATION
Install the cable ends marked with a white or blue band to the control head assembly. The cables must be attached to the control head before connection to the system air flaps.
- Remove the climate control head from the center dash assembly to access the control head cable ends.
- Remove the lower dash panels as necessary to access the cable lever arms.
- Attach the airflow distribution cable (cable 2) to the airflow distribution knob's lower control lever.
This cable can be identified as follows:
Operates the mode/central air flap Cable has a black sleeve and is 25.0 inches (634 mm) long Cable is marked with a white band
- Press the cable's sleeve against the control head stop and install the retaining clip.
- Attach the temperature control/air blend cable (cable 3) to the air temperature knob's control lever.
This cable can be identified as follows:
Operates the temperature control/air blend cable air flap Cable has a blue sleeve and is 21.0 inches (535 mm) long Cable is marked with a white band
- Press the cable's sleeve against the control head stop and install the retaining clip.
- Attach the airflow distribution cable (cable 1) to the airflow distribution knob's upper control lever.
This cable can be identified as follows:
Operates the footwell/defroster air flap Cable has a black sleeve and is 37.5 inches (954 mm) long Cable is marked with a blue band
- Install the cable such that the blue band is over the retaining clip mount and install the retaining clip directly over the blue band.
- Install the climate control head.
- Set the air flow distribution knob to defrost.
- Connect the longest airflow cable (cable 1) to the footwell/defroster flap lever on the heater's air box.
- Press and hold the flap's lever toward the retaining clamp perch and install the cable retaining clip.
- Set the airflow distribution knob to the Vent position.
- Connect the short airflow cable (cable 2) to the central/mode flap's lever.
- Pull and hold the mode flap's lever away from the retaining clamp perch and install the cable retaining clip. Check the operation of both air flaps making sure they can be heard contacting their stops.
- Set the temperature control knob to full cold.
- Connect the blue-sleeved cable (cable 3) to the air blend/temperature flap's lever.
- Pull and hold the mode flap's lever away from the retaining clamp perch and install the cable retaining clip. Check the operation of the air blend/temperature flap making sure it can be heard contacting the stops.
Fig. Side view of the control head and cable location. 1. Footwell/defrost flap cable-2. Air distribution cable-3. Temperature control flap cable
Fig. Temperature flap cable location and adjustment
------------------
Check out this list below for more help:----
Water pump replacing procedure for all vehicles?
All types of car overheating problems and troubleshooting?
How to replace heater core for All car models?
Click the link below:---
------------
For Instructions regarding All types of car heater problem repairs.
All types of Car heater Problem troubleshooting?
For car AC related and Heater related solutions. You can refer the options mentioned below:---
Car AC Blows Warm Air ?
How to test AUTO AC pressure?
AUTO Air Conditioning Troubleshooting?
AUTO A/C COOLING PROBLEM?
Fixing refrigerant leak?
How to locate Car AC Refrigerant leak?
CAR AC INTERMITTENT COOLING?
What causes INTERMITTENT COOLING on Car AC system?
Car AC making Noise?
BAD ODOR ON CAR AIR CONDITIONER?
How to Recharge Car's Air Conditioner
For details regarding:--
Boxkenworth heater
ReplyDeleteThinking about hiring a mobile app design company in Bangalore that can design visually stunning mobile apps for you? If yes, connect with Apprient today!!"
In extreme cold, we keep the heater on for long periods of time to make the house comfortable. This puts more pressure on the device. This pressure can cause the motor to malfunction or become inoperative. So check if the heater motor is working properly.5 easy solutions for heater problems
ReplyDelete