How to remove Door panel on 2009 Hummer H2.
The complete procedure with diagram is explained below:----
The front and rear door panel removal :----
The procedure is basically the same for both sides front or rear:---
The procedure starts here.See Component Name listed below and compare with the diagram shown below the procedure:----
1) Front Side Door Inside Handle Bezel Finish Cover
2) Front Side Door Pull Handle Cover
3) Front Side Door Locking Rod Knob Assembly
Procedure
Ensure the locking rod is in the unlocked position.
Use a flat-bladed tool to disengage the detent tab and then remove the knob by pulling upward.
When re-installing, push the knob down until the detent tab touches the locking rod opening cover.
Push the detent tab into the lock knob to locking rod.
4) Front Side Door Trim Panel Bolt (Qty: 3)
Tighten
2 N·m (18 lb in)
5)Front Side Door Trim Panel Assembly
Procedure
Disengage retainer.
Use a door trim pad removal tool to aid in the removal of the trim panel.
Disengage the door lock cable.
Disconnect the electrical connectors.
Transfer parts as necessary.
The help diagram is shown below:----
NOW THE REAR SIDE DOOR PANEL REMOVAL DIAGRAM:---
This will help.
Thanks.
How to remove the door panel to install a new window regulator?
http://howtobyme.blogspot.com/2011/08/how-to-remove-door-panel-to-install-new.html
window motor, regulator and door panel removal?
http://technoanswers.blogspot.com/2011/02/ford-explorer-window-motor-regulator.html
How to Remove Door Panels ?
http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-door-panels-on-acura.html
Vehicle door panel components?
http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html
The complete procedure with diagram is explained below:----
The front and rear door panel removal :----
The procedure is basically the same for both sides front or rear:---
The procedure starts here.See Component Name listed below and compare with the diagram shown below the procedure:----
1) Front Side Door Inside Handle Bezel Finish Cover
2) Front Side Door Pull Handle Cover
3) Front Side Door Locking Rod Knob Assembly
Procedure
Ensure the locking rod is in the unlocked position.
Use a flat-bladed tool to disengage the detent tab and then remove the knob by pulling upward.
When re-installing, push the knob down until the detent tab touches the locking rod opening cover.
Push the detent tab into the lock knob to locking rod.
4) Front Side Door Trim Panel Bolt (Qty: 3)
Tighten
2 N·m (18 lb in)
5)Front Side Door Trim Panel Assembly
Procedure
Disengage retainer.
Use a door trim pad removal tool to aid in the removal of the trim panel.
Disengage the door lock cable.
Disconnect the electrical connectors.
Transfer parts as necessary.
The help diagram is shown below:----
NOW THE REAR SIDE DOOR PANEL REMOVAL DIAGRAM:---
This will help.
Thanks.
Users Who Viewed This Problem Also Viewed:
How to remove the door panel to install a new window regulator?
http://howtobyme.blogspot.com/2011/08/how-to-remove-door-panel-to-install-new.html
window motor, regulator and door panel removal?
http://technoanswers.blogspot.com/2011/02/ford-explorer-window-motor-regulator.html
How to Remove Door Panels ?
http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-door-panels-on-acura.html
How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html
Vehicle door panel components?
http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html
For All types of Car models and brands help
Go to Newly Launched
FREE Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html
Go to Newly Launched
FREE Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html
&
Complete Car repair Help FREE?
http://repairhelpcenter.blogspot.in/2012/03/complete-car-repair-help.htmlComplete Car repair Help FREE?
No comments:
Post a Comment