@

Showing posts with label car instrument cluster. Show all posts
Showing posts with label car instrument cluster. Show all posts

Thursday, November 22, 2012

Instrument Panel lights Now Working

2003 Acura Instrument Panel lights not working

Interior compartment and instrument Panel lights Now Working

The possibilities are faulty blown fuse or issue with wiring.

Either the fuse is blown or its wiring is shorted or got loose disconnected in between.

See the fuse box diagram and instrument panel light wiring diagram below:------

ACURA FUSE BOX DIAGRAM 


There is a fuse block under the dash on the driver side, (also one on the passenger side) that you will want to check the #9 fuse. Here is a diagram of the inside lighting and the fuse location.

under dash fuse box

ACURA WIRING DIAGRAM

ACURA FUSE INDEX




These will help.
Thanks.

Users Who Viewed This Problem Also Viewed:

How to remove dash trim on 2002 GMC Sierra?

http://schematicsdiagram.blogspot.in/2012/03/how-to-remove-dash-trim-on-2002-gmc.html

Car instrument cluster has no power?


How to replace Instrument Cluster on Acura Car Models?


How to replace Instrument panel and dashboard on Toyota car?

How to remove instrument panel on Chevrolet car?

How to remove control panel on Buick regal?

http://howtobyme.blogspot.in/2012/02/how-to-remove-control-panel-on-buick.html

Where is Instrument cluster Light Fuse located on 1996 Honda Accord?

1997 Cadillac Catera FUSE panel Diagram?

http://schematicsdiagram.blogspot.com/2011/12/1997-cadillac-catera-fuse-panel-diagram.html



                                








Tuesday, December 6, 2011

How to remove instrument cluster on 1994 Honda Accord?

Replacing instrument cluster/instrument panel is not very easy.But with proper procedure and details,its possible.
The details are as follows :-----





yes, the radio has to come out, as 2 of the trim panel screws are hidden by the radio.

This same instructions are for 1990-95 Accord
See Figures 7, 8 and 9
  1. Disconnect the negative battery cable. If so equipped, disable the Supplemental Restraint System (SRS).
  2. Lower the steering wheel to its lowest position.
  3. Remove the center console.
  4. Remove the ashtray and ashtray holder.
  5. Remove the radio/tape player.
  1. Remove the coin box, switches and dash light controller from the instrument panel.
  2. Remove the mounting screws securing the instrument panel. This is a large, formed piece of plastic-don't crack it.

Fig. Fig. 8: Instrument panel retaining screw locations on 1994-95 Accords 
  1. Lay a protective piece of cloth over the steering wheel pad.
  2. Remove the four screws holding the instrument cluster. Pull the cluster forward enough to allow access to the wiring connectors.


Fig. Fig. 9: The instrument cluster is retained by four screws 
  1. Disconnect the wiring harnesses and remove the instrument cluster.
  2. Individual instruments may be removed from the cluster after it is removed from the car. Avoid damage to any terminals or the printed circuit board.

To install:
  1. Install the gauge cluster; connect the wiring before it is fully in place. Install the retaining screws.
  2. Install the instrument panel. Make sure it is correctly placed. Install the retaining screws.
  3. If applicable, install the air vents.
  4. Install the coin box, switches and dash light controller.
  5. Install the radio, ashtray holder and ashtray.
  6. Install the console.
  7. If applicable, enable the SRS.
  8. Connect the negative battery cable.
This details will help.
---------------
If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.

For more relates,solutions and help,check the list mentioned below:------