Replacing instrument cluster/instrument panel is not very easy.But with proper procedure and details,its possible.
The details are as follows :-----
To install:
Car instrument cluster has no power?
How to replace Instrument Cluster on Acura Car Models?
How odometer works in cars?
Warning lights on and speedometer died?
ABS & Brake lights warning indicator steady on dash and speedometer not working for Dodge Ram?
http://howtobyme.blogspot.com/2011/11/abs-brake-lights-warning-indicator.html
The details are as follows :-----
yes, the radio has to come out, as 2 of the trim panel screws are hidden by the radio.
This same instructions are for 1990-95 Accord
See Figures 7, 8 and 9
This same instructions are for 1990-95 Accord
See Figures 7, 8 and 9
- Disconnect the negative battery cable. If so equipped, disable the Supplemental Restraint System (SRS).
- Lower the steering wheel to its lowest position.
- Remove the center console.
- Remove the ashtray and ashtray holder.
- Remove the radio/tape player.
- Remove the coin box, switches and dash light controller from the instrument panel.
- Remove the mounting screws securing the instrument panel. This is a large, formed piece of plastic-don't crack it.
Fig. Fig. 8: Instrument panel retaining screw locations on 1994-95 Accords
- Lay a protective piece of cloth over the steering wheel pad.
- Remove the four screws holding the instrument cluster. Pull the cluster forward enough to allow access to the wiring connectors.
Fig. Fig. 9: The instrument cluster is retained by four screws
- Disconnect the wiring harnesses and remove the instrument cluster.
- Individual instruments may be removed from the cluster after it is removed from the car. Avoid damage to any terminals or the printed circuit board.
To install:
- Install the gauge cluster; connect the wiring before it is fully in place. Install the retaining screws.
- Install the instrument panel. Make sure it is correctly placed. Install the retaining screws.
- If applicable, install the air vents.
- Install the coin box, switches and dash light controller.
- Install the radio, ashtray holder and ashtray.
- Install the console.
- If applicable, enable the SRS.
- Connect the negative battery cable.
This details will help.
---------------
If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.
For more relates,solutions and help,check the list mentioned below:------
Car instrument cluster has no power?
How to replace Instrument Cluster on Acura Car Models?
How odometer works in cars?
How to trouble shoot speedometer?
No comments:
Post a Comment