Its a ECM scan Error code.Gets detected when vehicles computer is scanned.The code stored in vehicles computer.
As per details
The P0455 defines "EVAP System Large Leak Detected" - very commonly, this can be a loose, missing or faulty Fuel Cap.
In some cases even putting fuel into the tank while the engine is running can set this code.
Sp first make sure the cap is tight. Check the underside of the cap for any visible damage. If there are any doubts, replace the fuel cap. If the cap is known to be good, another common fail item associated with this code is the EVAP Purge Solenoid. Carefully inspect the vacuum lines to the solenoid for any cracks, holes, or loose/missing connections. The solenoid should also be tested for proper operation. If the solenoid checks ok, the best way to find a "leak" in the EVAP system, is to have the system "smoked". This is where a machine forces smoke throught the system, and the leak will reveal itself. Prices for this service vary from shop to shop, but it is the most efficient way, as chasing down a leak in the EVAP system can be very time consuming sometimes.
See the help diagram shown below:----
This details will help you .
Thanks.
Evaporative Emissions System codes details?
http://schematicsdiagram.blogspot.com/2011/11/evaporative-emissions-system-codes.html
AUTOMOTIVE EMISSIONS?
http://schematicsdiagram.blogspot.com/2011/12/automotive-emissions.html
Emissions schematic Diagram?
http://schematicsdiagram.blogspot.com/2011/12/emissions-schematic-diagram-for-1984.html
How to disconnect the hose form the Evap Canister?
http://schematicsdiagram.blogspot.com/2011/12/how-to-disconnect-hose-form-evap.html
EVAP connecting hose to PCV valve Collapse?
http://schematicsdiagram.blogspot.com/2012/01/evap-connecting-hose-to-pcv-valve.html
As per details
The P0455 defines "EVAP System Large Leak Detected" - very commonly, this can be a loose, missing or faulty Fuel Cap.
In some cases even putting fuel into the tank while the engine is running can set this code.
Sp first make sure the cap is tight. Check the underside of the cap for any visible damage. If there are any doubts, replace the fuel cap. If the cap is known to be good, another common fail item associated with this code is the EVAP Purge Solenoid. Carefully inspect the vacuum lines to the solenoid for any cracks, holes, or loose/missing connections. The solenoid should also be tested for proper operation. If the solenoid checks ok, the best way to find a "leak" in the EVAP system, is to have the system "smoked". This is where a machine forces smoke throught the system, and the leak will reveal itself. Prices for this service vary from shop to shop, but it is the most efficient way, as chasing down a leak in the EVAP system can be very time consuming sometimes.
See the help diagram shown below:----
This details will help you .
Thanks.
Users Who Viewed This Problem Also Viewed:
Evaporative Emissions System codes details?
http://schematicsdiagram.blogspot.com/2011/11/evaporative-emissions-system-codes.htmlAUTOMOTIVE EMISSIONS?
http://schematicsdiagram.blogspot.com/2011/12/automotive-emissions.htmlEmissions schematic Diagram?
http://schematicsdiagram.blogspot.com/2011/12/emissions-schematic-diagram-for-1984.htmlHow to disconnect the hose form the Evap Canister?
http://schematicsdiagram.blogspot.com/2011/12/how-to-disconnect-hose-form-evap.htmlEVAP connecting hose to PCV valve Collapse?
http://schematicsdiagram.blogspot.com/2012/01/evap-connecting-hose-to-pcv-valve.htmlFor All types of Car models and brands help
Go to Newly Launched
FREE Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html
Go to Newly Launched
FREE Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html
&
Complete Car repair Help FREE?
http://repairhelpcenter.blogspot.in/2012/03/complete-car-repair-help.htmlComplete Car repair Help FREE?
No comments:
Post a Comment