@

Showing posts with label flasher unit. Show all posts
Showing posts with label flasher unit. Show all posts

Sunday, December 16, 2012

2005 Ford Expedition Flasher Control Switch

Flasher not working


Its issue with Flasher switch.

See below the location of Flasher switch in the diagram shown


Ford Flasher switch


The flasher is located in Auxiliary relay box #3.



Auxiliary relay box


location of the flasher in the relay box #3

Flasher relay switch



These details will help.
Thanks.


SOLVE YOUR 4 WAY FLASHER RELATED PROBLEMS HERE


Friday, December 14, 2012

2002 Ford Ranger Flasher relay

Where is Flasher relay located on Ford

Flasher light not working

Its faulty flasher relay it has to be replaced


The flasher relay is located in the Aux. Relay Box next to the lower part of the steering column.


It is p111 in the picture. It is not on the column. It will be on the right side of the column probably attached to the dash. It is a black box about 4" long

See the flasher relay location diagram shown below:---

flasher relay





SOLVE YOUR 4 WAY FLASHER RELATED PROBLEMS HERE
----------
These details will help.
Thanks.




Thursday, November 22, 2012

Directional signals and flashers quit working

1998 Lincoln Towncar Directional signals and flashers not working


In that case the fuse controlling flashers and turn signals need to be checked


Lincoln Towncar instrument panel fuse box 

You need to check fuse number 10,12 and 21 in the IP fuse box.
All the fuses are of 20AMP.

Also check for power at both sides of them with the key on.


See the Fuse wiring diagram for Flashers and Turn signals 

lincoln wiring diagram


Also one more thing,

The Turn Signal Flasher output is provided by the Lighting Control Module.Its also called as LCM.
These LCM is located under dash behind the LH side of the instrument panel.
There are no separate relays for Turn Signal Flasher output aside from the LCM.


Don't replace LCM without checking the switch first. If it is the turn signals and the hazards, then I would think it is going to be a fuse.If fuse is not blown,then it can be faulty Hazard switch or its wiring issue.If all checked ok,then its faulty LCM.

For how to replace LCM on Lincoln Town car,
check the link below:-----

How to replace Light control module



Before replacing any thing go with these testing possibilities :-------




graphic


graphic


graphic


graphic




These details will help.
Thanks.


Users Who Viewed This Problem Also Viewed:

1989 Class A RV e350 460 4-way flashers do not work but the blinkers work ok.

4 way flashers work do not work but the blinkers work ok

2005 Ford F650 XLT  Both Turn Signal lights and 4-way flashers not working.

4 way flasher not working or the direction indicators not working.

2002 Chevrolet Astro Four Way Flasher and Brake Lights Not working

4 Way Flasher and Brake Lights Not Working

2009 Mazda 3  Four-Way flasher not working but Turn Signal not working

Turn signal works but 4 way flasher not working.

1990 Chevy Lumina 4-Way Flasher Not

2006 Chrysler pt cruiser -- Both  turn signals or 4-way flasher work

2006 pt cruiser: 4-way flasher work..They blink..fuses under the hood
                          

4 way flasher and direction indicators not working at all on Ford Escort Cabriolet vehicle.

Ford Escort: 4 way flasher not working or direction indicators

4 way flashers on  1997 Subaru outback won't turn OFF.

4 way flashers on 97 outback won't turn OFF

What is 4 Way Flasher

Nissan/ Dustan Quest: stopped working four way flasher..flasher module clicks

Nissan Turn signal switch and four way flasher switch do not working


2009 Ford F750 turn signals work fine...function switch..relay

2009 Ford 4 Way Flasher Not working










Tuesday, December 13, 2011

Turn signals not working on 1987 Jeep Wagoneer?


First check the fuse,if the fuse is checked ok,then inspect the flasher.If the flasher is also tested ok,then its Turn-signal switch issue.It has to be replaced.
If all of the inputs check out ok to the turn signal switch, then the turn signal switch is bad and will need to be replaced. The two inputs to to the turn signal switch are the purple wire and the brown wire.

----------
This details will help you.
----------
If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.
--------

For more car lights repairs and replacement, check the list below:----

Only high beams work but head lights not working on Ford F350?


Only high beams working on GMC Savana?

High beams stopped working but headlights still work?


Only one head light works on 2001 Dodge Caravan?

http://howtobyme.blogspot.com/2011/11/only-one-head-light-works-on-2001-dodge.html


The Brake Indicator Light Stays On dash of car?

The ABS and Traction Control Lights stays ON dash of car?


Check Engine Light On car?


ABS & Brake warning lights remains steady on dash?

 -------------------------

How to replace Interior Lights on car?

 

Car lights not working, even after replacing the bulb/lamp?

Click this link below:--
 ---------------

 

How to replace head lights on car?

--------------------

How to replace Parking, turn, and Brake Lights on car?

Upper brake lights work, but low brake light not working?

Oldsmobile Alero license plate bulb replacing?

Heating Knob light bulb under dash replacement for Chevrolet Equinox?

One brake light on driver side not working, but other lights work?

Car Tail Lights Not Working?

Right turn signal not working on Pontiac Car?

Only one side indicator light working on car?

http://schematicsdiagram.blogspot.com/2011/12/only-one-side-indicator-light-working.html