If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.
Not only ford car models,but this problem is noticed on many car models.Basically heater starts blowing cold air,instead of warm/hot air.
First inspect,is your engine up to required temperature or not.
If you are sure the engine is getting up to temperature then your problem will be a part called the electrically positioned blend door and or the little motor that moves the blend door. The blend door moves back and forth between the AC core and the heater core to provide a mix of hot and cold air or hot or just cold depending on what you set the air temperature control at, blue being cold and red being hotter. This is all to common a problem on Ford rangers and Explorers which share the same components of the heating and AC systems. When the door fails it is usually on the cold setting position. The kicker here is that you must remove the dash to replace the parts, the blend door and the blend door actuator motor should both be replaced at the same time, the common reason for the motor to fail is a sticking hard to move blend door due to warping of the plastic it is made from.How to replace heater core for All car models?
How to Flush Heater Core?
All types of Car heater Problem troubleshooting?
Blower only blows warm air ?
http://schematicsdiagram.blogspot.com/2011/11/blower-only-blows-warm-air.html
AC cool air enters only the passenger compartment even with the heat control turn all the way?
Saturn Car Blower motor Only works on High?
http://howtobyme.blogspot.com/2011/11/saturn-car-blower-motor-only-works-on.html
No hot air from defrost vents?
http://howtobyme.blogspot.com/2011/12/no-hot-air-from-defrost-vents.html
Radiator replaced but still Car is over heating?
http://howtobyme.blogspot.com/2011/12/radiator-replaced-but-still-car-is-over.html
Not only ford car models,but this problem is noticed on many car models.Basically heater starts blowing cold air,instead of warm/hot air.
First inspect,is your engine up to required temperature or not.
If you are sure the engine is getting up to temperature then your problem will be a part called the electrically positioned blend door and or the little motor that moves the blend door. The blend door moves back and forth between the AC core and the heater core to provide a mix of hot and cold air or hot or just cold depending on what you set the air temperature control at, blue being cold and red being hotter. This is all to common a problem on Ford rangers and Explorers which share the same components of the heating and AC systems. When the door fails it is usually on the cold setting position. The kicker here is that you must remove the dash to replace the parts, the blend door and the blend door actuator motor should both be replaced at the same time, the common reason for the motor to fail is a sticking hard to move blend door due to warping of the plastic it is made from.
This basic details will help.Thanks.
---------------
See the list mentioned below,for more same type of solved problems:-------
How to replace heater core for All car models?
Click the link below:---
How to Flush Heater Core?
------------
For Instructions regarding All types of car heater problem repairs.
No comments:
Post a Comment