schematics and diagrams: car tail lights not working

Showing posts with label car tail lights not working. Show all posts

Tuesday, December 25, 2012

Sebring tail lights and dash lights not working

Chrysler Sebring Tail lights and dash lights not working

Issue can be faulty fuse and relay controlling dash lights and tail lights

Check fuse #3 & #4 in underhood fuse box , it may be blown;

On most of such cases the problem is the headlamp switch or even the tailamp relay.

You can try replacing the relay first and see if that takes care of it.

See below location of fuse as well as relay

Underhood fuse box 1997 Chrysler Sebring

Fuse #3 & #4
tail light fuse

Location of relay
Engine compartment relay box

On some cases the problem is ground wire connection between the switch and the fuse block under the hood.

These details will help.
Thanks.

OTHER MOST VIEWED SOLUTIONS:----

1994 Toyota Camry: Bypass Tail light Relay Circuit?

http://whatisbyme.blogspot.in/2012/04/1994-toyota-camry-bypass-tail-light.html

-----------

2008 Toyota RAV4: Replace Tail light Lens Cover?

http://technoanswers.blogspot.in/2012/04/2008-toyota-rav4-replace-tail-light.html

--------

2003 Chevrolet S10 Tail light Fuse

http://schematicsdiagram.blogspot.com/2012/11/2003-chevrolet-s10-tail-light-fuse.html

---------

Chevrolet Parking light and Tail lamp light Wiring diagram

http://schematicsdiagram.blogspot.com/2012/11/chevrolet-parking-light-and-tail-lamp.html

----------

Car Tail Lights Not Working?

http://schematicsdiagram.blogspot.com/2011/12/car-tail-lights-not-working.html

----------

Turn Signal Not working

http://technoanswers.blogspot.com/2012/11/turn-signal-not-working.html

----------

Right turn signal not working on Pontiac Car?

http://schematicsdiagram.blogspot.com/2011/12/right-turn-signal-not-working-on.html

--------

Only one side indicator light working on car?

http://schematicsdiagram.blogspot.com/2011/12/only-one-side-indicator-light-working.html

-----------

Turn signals not working on 1987 Jeep Wagoneer?

http://schematicsdiagram.blogspot.com/2011/12/turn-signals-not-working-on-1987-jeep.html

-----------

SOLVE YOUR 4 WAY FLASHER RELATED PROBLEMS HERE

http://repairhelpcenter.blogspot.com/2012/11/4-way-flasherturn-signal-flashersignal.html

----------

Tuesday, November 20, 2012

Chevrolet Parking light and Tail lamp light Wiring diagram

Wiring diagram And Fuse box

Tail lights and Parking lights wiring diagram for 2002 Chevy S10 vehicle

The wiring diagram is as follows :----

parking light and tail light wiring

The tail lamps are protected by different fuses. You will want to check the fuse in the under hood fuse box.

The fuse box is as follows :----

park light fuse chevy

These details will help.
Thanks.

Users Who Viewed This Problem Also Viewed:

Headlight wiring diagram for 1997 Lincoln Town Car?

http://technoanswers.blogspot.in/2012/02/headlight-wiring-diagram-for-1997.html

Car Tail Lights Not Working?

http://schematicsdiagram.blogspot.com/2011/12/car-tail-lights-not-working.html

Turn Signal Not working

http://technoanswers.blogspot.com/2012/11/turn-signal-not-working.html

2003 Chevrolet S10 Tail light Fuse

Rear Tail lights not working on Chevy S10.

Bulbs are checked ok,all other lights function right,but tail lights for rear side not working.

There is a fuse that controls these light.If the tail light lamp is tested ok,then its blown fuse or short in wiring.

First test the fuse

Chevy S10 Fuse box diagram

The under hood fuse box diagram for Chevrolet vehicle

The rear tail lamps are protected by different fuses. You will want to check the LR park fuse in the under hood fuse box. (10amp)

See the fuse box diagram below:----

You can easily see the LR PRK FUSE 10A

These details will help.
Thanks.

Lincoln town car Blower Speed Controller Location

http://schematicsdiagram.blogspot.com/2012/11/licoln-towncar-blower-speed-controller.html

2002 Lincoln Town car Fuse Box

http://schematicsdiagram.blogspot.com/2012/11/2002-lincoln-town-car-fuse-box.html

2007 KIA Rio: Brake Light Fuse Box Diagram?

http://repairhelpcenter.blogspot.in/2012/06/2007-kia-rio-brake-light-fuse-box.html

1996 Chevy Cavalier Cluster Fuse Box Diagram?

http://schematicsdiagram.blogspot.in/2012/04/1996-chevy-cavalier-cluster-fuse-box.html

Freightliner fl112 fuse box diagram?

http://technoanswers.blogspot.com/2012/01/freightliner-fl112-fuse-box-diagram.html

Car will not turn the ignition to start?

http://technoanswers.blogspot.com/2012/01/car-will-not-turn-ignition-to-start.html

Where is Fuse box located on 2002 Honda Accord?

http://howtobyme.blogspot.com/2011/12/where-is-fuse-box-located-on-2002-honda.html

Toyota Hilux Surf Fuse Box Diagram?

http://technoanswers.blogspot.in/2012/06/toyota-hilux-surf-fuse-box-diagram.html

How to reset Radio code after car battery is died?

http://howtobyme.blogspot.com/2011/12/how-to-reset-radio-code-after-car.html

Wednesday, December 7, 2011

Car Tail Lights Not Working?

Tail lights not working,first inspect the tail light controlling fuse.In most car models the fuse is located in the instrument panel fuse box.If the fuse is blown,then remove and replace the fuse.
But if fuse is checked ok,then inspect tail light bulb.If the bulb is problem,then replace the bulb.But if bulb is checked ok,then it can be wiring issue.There is a short.
Run a new wire from a solid ground point( like from the battery negative) to the black wire on the tail light fixture and turn on lights. If you have a working light then you'll need to find where that ground wire for the socket connects to the vehicle and inspect the mounting point for corrosion. Also inspect where the wire goes into the socket for corrosion and inspect the existing ground wire for breaks or lumps. If you cannot get the existing ground wire to work then you will need to replace the ground wire and mount it to a new ground location on the vehicle chassis or frame. When installing a new wire, make sure to coat all parts with Dielectric grease to ensure a clean connection and help prevent corrosion from building up. Also inspect your bulb socket for discoloration or corrosion. You may be able to clean out the socket using a water and baking soda mixture, depending on the severity of the corrosion. If you clean it out, use compressed air to dry out the socket and put a generous coat of Dielectric grease in there to help promote the connection.

This details will help.Thanks.

-----------------

If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.

For more car lights repairs and replacement,check the list below:----