2005 Cadillac SRX: How to Replace Power Mirror?

Power mirror not working or damaged.If its confirmed that mirror unit is faulty then it has to be replaced.First inspect the power mirror controlling fuse and the switch which operated the mirror.If both checked ok,then check the wires.If the voltage is checked ok at wires and connectors but mirror is inoperative,then power mirror assembly has to be replaced.

Below is the details procedure mentioned ,that will help to remove and install power mirror.


To replace the power mirror, you have to remove the door trim panel first:
If the window glass is up,then make it down.

See the diagram shown below:-----



Once this is done continue further to remove bezel
See the diagram shown below:----



Once the bezel is out,remove the door trim cover.See the diagrams shown below:-----



Now remove the Door trim,as shown below in the diagram:-----




Now once the Door trim is out,replacing power mirror can be performed.

See below the details and diagrams:-----




The installation is in reverse or removal.
This details will help.
Thanks.

Hope all goes well.

For All types of Car models and brands help 
Go to Newly Launched

FREE Car repair guide? 
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html 

& 
Complete Car repair Help FREE? 

http://repairhelpcenter.blogspot.in/2012/03/complete-car-repair-help.html

Passenger side Folding Mirror is not operating?

If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.

Many car users face this problem.
Ask the helper to control the power fold buttons, while you check closely the passenger mirror. If you  feel or hear even a faint hum of the motor while commanded, try giving it a little help, but don't force it if you think it doesn't have enough power to extend or retract itself. The motor could be really stuck or inoperative.
Sometimes if the mirror has been accidentally or manually folded, it needs to be reset by just pressing on the fold buttons a few rounds and let the mirrors fold by itself. Like an exercise.
If you hear the humming noise whenever the fold buttons are pressed, we can assume that the circuit on that side is ok since it is responding electrically, and that a jammed or stuck mechanism is preventing it to move.
If you don't feel or hear any humming, as in totally no sign of response, then there will be additional considerations before deciding to go for a replacement mirror. You will need to confirm if the fault is on the wirings, a door module, or the mirror motor itself. A scan tool test may be recommended for effective diagnosis.
The power fold mirror can be serviced as an assembly.So get it inspected by professional car pro.

This basic details will help.Thanks.

-----------

For more car problem ,troubleshooting solutions,check the list mentioned below :----

How to Replace a Mirror

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-mirror.html

How to Replace a Mirror Glass on car?

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-mirror-glass-on-car.html

Car jerks while going uphill and Check engine light is ON?

http://schematicsdiagram.blogspot.com/2011/12/car-jerks-while-going-uphill-and-check.html

Car turns over, but only starts, if starter is jumped?

http://schematicsdiagram.blogspot.com/2011/12/car-turns-overbut-only-startsif-starter.html

Service Engine Soon light stays on?

http://schematicsdiagram.blogspot.com/2011/12/service-engine-soon-light-stays-on.html

Gasoline around gas cap?

http://schematicsdiagram.blogspot.com/2011/12/gasoline-around-gas-cap.html

Car will not run after resetting inertia switch on Mercury Mystique?

http://schematicsdiagram.blogspot.com/2011/12/car-will-not-run-after-resetting.html

VAN emits whitish bluish smoke and bad fuel smell from exhaust

http://schematicsdiagram.blogspot.com/2011/12/van-emits-whitish-bluish-smoke-and-bad.html

Car cigarette lighter fuse blows out?

http://schematicsdiagram.blogspot.com/2011/12/car-cigarette-lighter-fuse-blows-out.html

CD MECH ERROR?

http://schematicsdiagram.blogspot.com/2011/12/cd-mech-error.html

Car will not go into 4WD high or 4WD low?

http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

Truck is hard to start and Emits smoke while starting?

http://schematicsdiagram.blogspot.com/2011/12/truck-is-hard-to-start-and-emits-smoke.html

Engine cuts out at 3000 RPM?

http://schematicsdiagram.blogspot.com/2011/12/engine-cuts-out-at-3000-rpm.html

Car turns over but will not start, only makes clicking sound?

http://schematicsdiagram.blogspot.com/2011/12/car-turns-over-but-will-not-startonly.html

Catalytic Converter glowing hot?

http://schematicsdiagram.blogspot.com/2011/12/catalytic-converter-glowing-hot.html

After getting car washed, check engine light is ON and key less entry not working, tried reprogramming. Also car shows fuel pressure?

http://schematicsdiagram.blogspot.com/2011/12/after-getting-car-washedcheck-engine.html

Fuel gauge jumps from empty to full?

http://schematicsdiagram.blogspot.com/2011/12/fuel-gauge-jumps-from-empty-to-full.html

Why airbag light flashes 7 times?

http://schematicsdiagram.blogspot.com/2011/12/why-airbag-light-flashes-7-times.html