In this case the Garage Shop replaced clutch assembly on Cadillac car but its going in gear and not releasing out.Its stuck.
On base of this description,the troubleshooting is as follows:---
First thing i will say,On 2006 caddy cts model the clutch is hydraulically actuated, so there is no adjustment. It is possible there is air trapped in the hydraulic system.That has to be bleed out. The best way to bleed the air out of the system is to use a hand held vacuum pump to apply vaccuum to the top of the clutch fluid reservoir.
There is no adjustment at the pedal or linkage since this system is hydraulic. If the clutch does not disengage properly and all of the air is bled out of the system then the clutch has to be binding mechanically due to improper installation.
Also the other possibility can be issue with slave cylinder.
The slave cylinder can be binding internally and causing the problem. I would suggest double checking the installation of all parts, if it all looks okay then replace the slave cylinder with a GM part.
This details will help.
Thanks.
For All types of Car models and brands help
Go to Newly Launched
FREE Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html
&
Complete Car repair Help FREE?
http://repairhelpcenter.blogspot.in/2012/03/complete-car-repair-help.html
On base of this description,the troubleshooting is as follows:---
First thing i will say,On 2006 caddy cts model the clutch is hydraulically actuated, so there is no adjustment. It is possible there is air trapped in the hydraulic system.That has to be bleed out. The best way to bleed the air out of the system is to use a hand held vacuum pump to apply vaccuum to the top of the clutch fluid reservoir.
There is no adjustment at the pedal or linkage since this system is hydraulic. If the clutch does not disengage properly and all of the air is bled out of the system then the clutch has to be binding mechanically due to improper installation.
Also the other possibility can be issue with slave cylinder.
The slave cylinder can be binding internally and causing the problem. I would suggest double checking the installation of all parts, if it all looks okay then replace the slave cylinder with a GM part.
This details will help.
Thanks.
No comments:
Post a Comment