Thursday, March 29, 2012

How to replace Blower motor on Toyota Corolla?

The procedure to replace blower motor is for all mentioned car models Toyota Celica, Corolla, ECHO & MR2.
The blower motor replacing details are as follows:---

  1. Remove the glove box assembly.
  2. Disconnect the connector from the blower motor.
  3. Remove the 3 screws and the blower motor. 

    Fig. Removal and installation of the blower motor
To install:
  1. Replace the blower motor and the three screws.
  2. Connect the electrical connector.
  3. Replace the glove box assembly.
  1. Remove the instrument panel.
  2. Remove the cooling unit.
  3. Remove the nut and disconnect the ABS ECU from its position.
  4. Disconnect the blower motor connector.
  5. Remove the two nuts, a bolt and the blower unit.
To install:
  1. Install the blower unit with the two nuts and a bolt.
  2. Install the ABS ECU with the bolt to the reinforcement.
  3. Connect the blower motor connector.
  4. Install the cooling unit.
  5. Install the instrument panel.

These details will help.


Car repair guide?


No comments:

Post a Comment