Pickup Truck Bed REMOVAL and INSTALLATION on ford vehicle?

REMOVAL & INSTALLATION

See Figure 1

Fig. Fig. 1: Pickup bed and mounting hardware

1. Clean out all dirt from the bed's attaching hardware and lubricate them to ease removal.
2. Remove all bolts attaching the bed to the frame.
3. As necessary, disconnect any wire harnesses connected to the bed.
4. Unbolt the fuel filler neck from the bed opening.
5. Lift the bed off of the frame.
6. Installation is the reverse of removal.
7. Be sure to use new bolts and other mounting hardware when installing. Replacement parts should be of the same specification as the original parts; i.e. do not use Grade 5 bolts where Grade 8 bolts were originally used.

To Order car parts online:--To get heavy discount on car parts .Click this link below:----

http://technoanswers.blogspot.com/2011/05/from-where-to-order-car-parts-online.html

For car error code diagnosis click the link below:---

http://www.automd.com/diagnose/?amdcid=apwldrbrd1

Car no start:--

http://technoanswers.blogspot.com/2011/05/car-will-turn-over-but-will-not-start.html