Spare Tire Carrier REMOVAL INSTALLATION?

REMOVAL & INSTALLATION

Ranger

See Figure 1

Fig. Fig. 1: Under-frame spare tire carrier

1. Remove the spare tire from the carrier.
2. Remove the bolt attaching the hinge assembly to the channel.
3. Remove the stud plate and the nuts attaching the hinge to the rear crossmember.
4. Remove the eye bolt from the channel.
5. Remove the bolts attaching the support assembly to the frame and remove the support.
6. Installation is the reverse of removal.

Explorer/Mountaineer

See Figure 2

Fig. Fig. 2: Under-frame spare tire carrier-Explorer/Mountaineer

1. Lower the spare tire and work the lift cup through the wheel to release the cable.
2. Remove the 2 screws attaching the winch to the support and remove the winch assembly from the underside of the truck.

To install:

3. Position the winch assembly on its support and install the screws.
4. Insert the cable end through the center of the wheel and raise into position. Raise until the clutch overrides. An audible snap will be felt.

To Order car parts online:--To get heavy discount on car parts .Click this link below:----

http://technoanswers.blogspot.com/2011/05/from-where-to-order-car-parts-online.html

For car error code diagnosis click the link below:---

http://www.automd.com/diagnose/?amdcid=apwldrbrd1

Car no start:--

http://technoanswers.blogspot.com/2011/05/car-will-turn-over-but-will-not-start.html