The Details to replace Accessory Drive Belts is as follows:---
Accessory Drive Belts
ADJUSTMENT
BELT ROUTINGS
INSPECTION
REMOVAL & INSTALLATION
Procedures are mentioned below for your help:----
2.3L Engine
3.0L Engine
![Click image to see an enlarged view](http://repairguide.autozone.com/znetrgs/repair_guide_content/en_us/images/0996b43f/80/20/8a/07/small/0996b43f80208a07.jpg)
4.0L Engine
2.3L & 4.0L Engines
3.0L Engine
Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html
Accessory Drive Belts
ADJUSTMENT
BELT ROUTINGS
INSPECTION
REMOVAL & INSTALLATION
Procedures are mentioned below for your help:----
Adjustment
Specific to:
Ford Ranger 2008-2009
The engines are equipped with an automatic belt tensioner. No adjustment is possible or necessary.
Belt Routings
2.3L Engine
Specific to:
Ford Ranger 2008-2009
![image](http://repairguide.autozone.com/znetrgs/repair_guide_content/en_us/images/0996b43f/80/20/8a/05/medium/0996b43f80208a05.gif)
Fig. Accessory drive belt routing-2.3L engine with A/C
![Click image to see an enlarged view](http://repairguide.autozone.com/znetrgs/repair_guide_content/en_us/images/0996b43f/80/20/8a/06/small/0996b43f80208a06.jpg)
Fig. Accessory drive belt routing-2.3L engine without A/C
Specific to:
Ford Ranger 2008
![Click image to see an enlarged view](http://repairguide.autozone.com/znetrgs/repair_guide_content/en_us/images/0996b43f/80/20/8a/07/small/0996b43f80208a07.jpg)
Fig. Accessory drive belt routing-3.0L with A/C
![Click image to see an enlarged view](http://repairguide.autozone.com/znetrgs/repair_guide_content/en_us/images/0996b43f/80/20/89/9b/small/0996b43f8020899b.jpg)
Fig. Accessory drive belt routing-3.0L without A/C
Specific to:
Ford Ranger 2008-2009
Inspection
Specific to:
Ford Ranger 2008-2009
Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.
Removal & Installation
2.3L & 4.0L Engines
Specific to:
Ford Ranger 2008-2009
On 2.3L and 4.0L engines, rotate the tensioner bolt counterclockwise and remove the belt.
3.0L Engine
Specific to:
Ford Ranger 2008
On 3.0L engines, rotate the tensioner bolt clockwise and remove the belt.
These details will help.
Thanks.
FOR MORE HELP GO TO: ---
No comments:
Post a Comment